Schluter^®–DITRA-HEAT-DUO-PS is a peel and stick membrane that features a pressure-sensitive adhesive (PSA) to bond the membrane to the substrate, eliminating the need for thin-set mortar. Quick and easy to install, DITRA-HEAT-DUO-PS is an uncoupling membrane with an integrated bonding fleece that provides sound control, as well as a thermal break. Optionally, the system can be customized with of DITRA-HEAT-HK floor heating cables to create a warm tiled floor.

• Simply remove the transparent release film from the fleece side of the membrane to expose the layer of adhesive, and embed into substrate.
• No thin-set required to install membrane means a faster and easier installation.
• The membrane can easily be repositioned until pressure is exerted.
• Duo Features sound control and thermal break.
• Duo Reduces impact sound transmission through floor-ceiling assemblies, making it ideal for multi-story construction.
• Duo Reduces heat loss to the substrate when installed over concrete.
• Less mess, less cleanup, and fewer tools required.
• Nominal 5/16” (8 mm) thickness minimizes tile assembly thickness and reduces transitions to lower surface coverings.
• Self-leveling compounds are not required to encapsulate the cables into the membranes.
• Available by the roll or by the sheet to accommodate various room sizes.
• If application area requires a membrane that meets or exceeds requirements of ANSI A118.10, please refer to thin-set versions of DITRA-HEAT and DITRA-HEAT-DUO. Alternatively, the DITRA-HEAT-PS or DITRA-HEAT-DUO-PS membranes may be covered with the Schluter^®-KERDI membrane, which is certified to meet ANSI A118.10.
• Available HERE

The post Schluter Ditra Heat PS and Duo PS appeared first on Allure Tile.

Now in-stock : Schluter Systems Ditra Mat in all sizes, Ditra-XL, Ditra Heat (regular and Duo), All-Set mortar, trowels and other materials.

Link : https://alluretile.com

Ceramic and stone tiles are durable, easy to maintain, and hygienic, representing the ideal surface coverings. However, today’s lightweight construction methods can make the installation of hard surface coverings particularly challenging. In order to protect the integrity of the tile assembly, an underlayment that performs multiple functions is required.

Schluter-DITRA is a polyethylene membrane with a grid structure of square cavities, each cut back in a dovetail configuration, and an anchoring fleece laminated to its underside. Schluter-DITRA is bonded to the substrate using thin-set mortar. The anchoring fleece on the underside of Schluter-DITRA is fully engaged in the mortar to provide a mechanical bond to the substrate. Tile is installed over Schluter-DITRA using the thin-bed method in such a way that the mortar becomes mechanically anchored in the square, cutback cavities of the Schluter-DITRA matting.

Designed specifically for ceramic tile and dimension stone installations, Schluter-DITRA serves as an uncoupling layer, waterproofing membrane, and vapor management layer that accommodates moisture from beneath the tile covering. Further, DITRA performs all these functions while still providing adequate support/load distribution for the tile covering.

a) Uncoupling
Tile has been successfully installed for thousands of years by incorporating an uncoupling layer, or forgiving shear interface, within the tile assembly. Schluter-DITRA provides uncoupling through its open rib structure, which allows for in-plane movement that effectively neutralizes the differential movement stresses between the substrate and the tile, thus eliminating the major cause of cracking and delaminating of the tiled surface.

b) Waterproofing
Schluter-DITRA provides reliable waterproofing in interior and exterior applications. Its polyethylene composition protects the substrate from moisture penetration, which is particularly important in today’s building environment where most substrates are moisture sensitive.

c) Vapor management
The distinguishing feature of Schluter-DITRA is the existence of free space created by the configured channels on the underside of the matting. The free space provides a route for excess moisture and vapor to escape from the substrate that could otherwise cause damage to the tile layer above. Thus, DITRA effectively manages moisture beneath the tile covering.

d) Support/load distribution
When placed on a solid foundation, columns or pillars can support tremendous loads. The same physical principle applies to Schluter-DITRA installations. Columnlike mortar structures are formed in the cutback cavities of the matting. Loads are transferred from the tile covering through these column-like mortar structures to the substrate. Since DITRA is virtually incompressible within the tile assembly, the advantages of uncoupling are achieved without sacrificing point load distribution capabilities. The ability of DITRA installations to support and distribute heavy loads while preserving the integrity of the tiled surface has been verified through extensive laboratory and field testing, including applications exposed to vehicular traffic.

The post Schluter Systems Ditra Mat Tile Underlayment appeared first on Allure Tile.

Schluter-KERDI is a pliable sheet-applied waterproofing membrane and vapor-retarder designed for the direct application of tile. KERDI is ideal for use in tiled showers, bathtub surrounds, residential steam showers, and other tile applications in wet areas.

Schluter-KERDI-SHOWER-T/-TS/-TT are prefabricated sloped shower trays with integrated KERDI waterproofing that eliminate the need for a mortar bed.

The trays, niche, curbs and benches are fully sealed (waterproffed), quick to install, and integrates with KERDI and KERDI-BOARD shower assemblies. The larger niche sizes include a KERDI-BOARD shelf that can be installed at any height to create separate compartments within the niche.

The post Schluter Kerdi Shower System appeared first on Allure Tile.

Schluter Systems All-Set modified tile thin set for use with Kerdi and Ditra products.

Previously, premium-grade unmodified mortars were necessary to install Schluter Kerdi and Ditra products. The reasoning was simple, Schluter couldn’t control additives in other vendors modified mortars and, therefore, couldn’t warranty the installation. Unmodified mortars lack the additives (latex, etc…) and would dry properly but cheaper mortars don’t bond well (or at all) to porcelain tile and the Kerdi/Ditra resulting in failed installations.

All-Set mortar is made by Schluter and is made to dry properly and maintain the warranty while gaining the significant benefits of modified mortars. Namely, long open times (3-ish hours) and superior adhesion especially when compared to cheap thin sets.

Available in 50lb bags of White or Grey.

We stock both white and grey every day as well as the Kerdi, Ditra and Ditra Heat trowels.

From Schluter’s site:

Schluter ALL-SET® is a specialized, modified thin-set mortar for use as a bond coat within tile assemblies that is optimized for use with Schluter® membranes and boards. Schluter ALL-SET® is smooth and creamy, as well as easy to handle and spread. It is sag-resistant and ideal for setting tile on both horizontal and vertical surfaces. Schluter ALL-SET® is suitable for use with ceramic, porcelain, and stone tile, including large and heavy tile, in conjunction with Schluter®-Systems’ uncoupling and waterproofing membranes (e.g., DITRA, DITRA-HEAT, KERDI, etc.), the Schluter®-Shower System, and KERDI-BOARD. Schluter ALL-SET® can be used in both interior and exterior systems and systems and is available in both grey and white.

The post Schluter All-Set modified tile mortar appeared first on Allure Tile.

SHELF-E is a corner shelf designed for tiled walls. Available in Triangluar, Neoangle and Quad sizes and each in 7 colors and as either Floral or Curve design. SHELF-E can also be installed into an existing shower easily.

The Schluter SHELF-W is a rectangular shelf with two trapezoid-perforated anchoring legs for installation on walls in conjunction behind the tile. Available in 7 colors and as either Floral or Curve design.

The Schluter SHELF-N is a rectangular shelf designed to fit into Schluter KERDI-BOARD-SN prefabricated niches. Available in 7 colors and as either Floral or Curve design.

New! Now available in TRENDLINE finishes: matte black, matte white, stone grey, greige, cream, and bronze.
Available in 5 shapes and in the Floral and Curve STYLE designs
Available in brushed stainless steel or aluminum in a range of textured color-coated finishes.
Coordinate with Kerdi Drain grates and profiles which we also stock.

Click here for our web page.

The post Schluter SHELF shower shelves appeared first on Allure Tile.